Leather Obi Belt with 3D Flower
When I was making the belt for my high school reunion outfit I was rushing that day to get it finished in time to wear to the reunion. It was a little rough so I wanted to give it another shot, this time with a bit of a variation (also made using pieces of a former leather jacket). I altered the pattern for the petals and made them into a 3D flower.
I started out by making the petals of the flower. I altered the original petal design to be wider so I could fold it over and glue (using E6000 -- I'm sure there's some sort of leather glue that would be better, but I just wanted to stick with what I had on hand this time).
I altered the direction of the fold so the petals wouldn't all be exactly the same. Hint: Only use a tiny bit of glue, using too much will interfere when sewing them on to the belt.
I clamped them and let them dry overnight. Bonus = I finally found a use for the cute, tiny clamps I picked up on impulse one day -- I'm glad I did, they were exactly what I needed!
I cut out the other pieces in the same way as the previous obi belt, except with wider ties and added seam allowance around the edges of the main belt pieces.
I sewed a triangle piece to each side of the rectangular piece, making sure right sides were together, opened the seam allowance on the back side, top stitched on either side of the seam and clipped some of the excess away at the edges.
I folded over 1/2" around the outer edges and top stitched.
When transitioning from the triangular to the rectangular piece there was some excess bunched up, so I cut a small slit, close to, but not touching the edge, overlapped the sides and sewed.
Then I sewed the ties to the ends of each triangular piece.
I arranged the petals for the flower and secured them with just a tiny dab of glue. I used a spice jar (the perfect size!) to hold them down until they dried.
After the glue was dry I sewed the inner corners of the petals onto the belt.
And I had my new belt!
I really love this version of the belt. I ended up breaking three leather needles making this one, but I think it was worth it!
------------------------------------------------------------------
I'll be linking up to these fabulous link parties:
Monday - Craft o Maniac Monday -- Craftastic Monday -- Amaze Me Monday -- Make it Great Monday -- Polly Want 2 Party -- Tuesday - Get Your Craft On -- Sew Cute Tuesday -- Upcycled Awesome -- Tip Me Tuesday -- Tuesday Talent Show -- Wednesday - Seven Thrity Three -- Wallet-Friendly Wednesday -- Create and Share -- Whatever Goes Wednesday -- Linkin’ with Lil’ Luna -- Thursday - Strut your Stuff Thursday -- Transformation Thursday -- Thrilling Thursday -- House of Hepworths -- Friday - Remodelaholic Friday -- Flaunt it Friday -- Frugal Friday -- Weekend Wander -- Show and Share Day -- It's Fun to Craft! -- Tickled Pink Fridays -- Weekend Wrap-up Party -- Catch as Catch Can -- Friday Flair -- Feature Yourself Friday -- Simply Link {Party} -- Pity Party -- Design Dazzle -- Saturday - Saturday Spotlight -- Sunday - The DIY Showoff Project Parade -- Sunday Showcase Party -- Creative Bloggers Party -- I Heart Naptime -- Think Pink Sundays
I started out by making the petals of the flower. I altered the original petal design to be wider so I could fold it over and glue (using E6000 -- I'm sure there's some sort of leather glue that would be better, but I just wanted to stick with what I had on hand this time).
I altered the direction of the fold so the petals wouldn't all be exactly the same. Hint: Only use a tiny bit of glue, using too much will interfere when sewing them on to the belt.
I clamped them and let them dry overnight. Bonus = I finally found a use for the cute, tiny clamps I picked up on impulse one day -- I'm glad I did, they were exactly what I needed!
I cut out the other pieces in the same way as the previous obi belt, except with wider ties and added seam allowance around the edges of the main belt pieces.
I sewed a triangle piece to each side of the rectangular piece, making sure right sides were together, opened the seam allowance on the back side, top stitched on either side of the seam and clipped some of the excess away at the edges.
I folded over 1/2" around the outer edges and top stitched.
When transitioning from the triangular to the rectangular piece there was some excess bunched up, so I cut a small slit, close to, but not touching the edge, overlapped the sides and sewed.
Then I sewed the ties to the ends of each triangular piece.
I arranged the petals for the flower and secured them with just a tiny dab of glue. I used a spice jar (the perfect size!) to hold them down until they dried.
After the glue was dry I sewed the inner corners of the petals onto the belt.
And I had my new belt!
I really love this version of the belt. I ended up breaking three leather needles making this one, but I think it was worth it!
------------------------------------------------------------------
I'll be linking up to these fabulous link parties:
Monday - Craft o Maniac Monday -- Craftastic Monday -- Amaze Me Monday -- Make it Great Monday -- Polly Want 2 Party -- Tuesday - Get Your Craft On -- Sew Cute Tuesday -- Upcycled Awesome -- Tip Me Tuesday -- Tuesday Talent Show -- Wednesday - Seven Thrity Three -- Wallet-Friendly Wednesday -- Create and Share -- Whatever Goes Wednesday -- Linkin’ with Lil’ Luna -- Thursday - Strut your Stuff Thursday -- Transformation Thursday -- Thrilling Thursday -- House of Hepworths -- Friday - Remodelaholic Friday -- Flaunt it Friday -- Frugal Friday -- Weekend Wander -- Show and Share Day -- It's Fun to Craft! -- Tickled Pink Fridays -- Weekend Wrap-up Party -- Catch as Catch Can -- Friday Flair -- Feature Yourself Friday -- Simply Link {Party} -- Pity Party -- Design Dazzle -- Saturday - Saturday Spotlight -- Sunday - The DIY Showoff Project Parade -- Sunday Showcase Party -- Creative Bloggers Party -- I Heart Naptime -- Think Pink Sundays